FIGURE 2

MWO 10-1670-293-20-2

Confluence

Wrap

FIGURE 2

Replacement

D-ring

CAUTION

Once screw pin is seated and staked, it will not be removed

due to the synthetic locking device being compromised.

NOTE

Slotted end of screw must face to the outside.

(5) With the slotted end of the bolt to the outside of the parachute harness, feed the screw pin

from the outside to the inside through the un-threaded hole to the threaded hole and completely

screw in the screw pin. It is recommended that a screwdriver blade the width of the screw pin be

used for better leverage and proper seating. Remember, the screw pin contains a synthetic

locking device and you must insure you completely seat the screw pin (Figure 3).

Threaded

Portion

Synthetic Locking

Device

Slotted End of

Screw Pin

FIGURE 3