Click here to make tpub.com your Home Page

Page Title: Appendix A. INSTRUCTIONS FOR REWORK OF MC1-1C CANOPIES
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

Back
Technical Publications
Up
MWO-10-1670-292-30-1 Modification of the Steering Orifice for MC1-1C Parachute NSN 1670-01-262-2359 Manual
Next
Attaching Reinforcement Tapes to the Parachute.

MWO 10-1670-292-30-1
APPENDIX A
INSTRUCTIONS FOR
REWORK OF MC1-1C CANOPIES
1.
Estimate of time to modify MCI-IC parachute with reinforcement modification.
a. Layout, mark and cut reinforcement tape: 45 minutes.
b. Install reinforcement tape: 10 minutes.
c. Inspect parachute for return to service: 5 minutes.
d. Total time on the second or more canopy worked on (reflects use of 308 zig-zag sewing machine): 1
hour.
2.  List of Materials/Tools Required:
a. Scissors: 1 pair.
b. Sewing Machine, Light Duty Singer Zig-Zag, or Equivalent: 1 each.
c. Approved Marking Pen: 1 each.
d. "T Pins and Weights: as required.
e. Tape Measure, T-Square, or Framing Square: 1 each.
f. 1 1/2 Inch Type III, Class 1 or 2 OD Tape, MIL-T-5083 (NSN 8315-00-753-5952): 1 roll.
g. Thread, Size E, conforming to V-T-295, Type 1, 2, or 3: 1 spool.
3.  The method for attaching tapes shall be 13-15 points per Inch in a double throw zig-zag 308 pattern, 1/4 inch
wide within 1/8 inch of the radial tape edges, in accordance with FED-STD-751.
4.  Instructions. Reinforcement modifications must be made to each of the two (2) steering orifices located in
gores # 4 and # 26 for each parachute. The procedures given below are for only one (1) gore. Repeat the entire
procedure for the other gore.
a.  Prefabrication of Reinforcement Tapes:
(1) Measure and cut the 1 1/2-inch tape into one (1) 30-inch length and one (1) 32-inch length. Mark the center
of each length. Mark at 1/2-inch from each end of each length for later tum-under.
(2) Measure and cut the 1 1/2 inch tape into one (1) 33 3/4-inch length. Designate one end as the top and mark
with a " " Mark the tape 2 1/2-inches from the top and at 171/2-inches from the top. Mark at 1/2-inch from each end for
T.
later tum-under.
(3) Lay out the 33 3/4 inch length of tape. Center the 30 inch length of tape over the 33 3/4-inch length of tape,
centering it over the 171/2-inch mark. Sew the centersection where the tapes cross with two (2) rows of stitching as
specified in paragraph 3 above.
(4) Center the 32 inch length of tape over the 33 3/4 inch length of tape, 1/2-inch up from the bottom of the 33
3/4-inch length of tape. Turn under the bottom 1/2-inch of the tape, folding it between the two (2) tapes.
Sew the center section where the tapes cross with two (2) rows of stitching as specified in paragraph 3 above.
3

Privacy Statement - Press Release - Copyright Information. - Contact Us