RECORDING AND REPORTING OF THE MODIFICATION.

MWO 10-1670-269-55-1

13. QUALITY ASSURANCE REQUIREMENTS. Prior to returning a shipment, a First Article

Test sample is required per manufacturer as well as periodic Lot Inspections conducted by

government Defense Contracting Management Agency personnel. A Technical/Rigger Type

Inspection (TRI) and an In-service Inspection will be completed at organizational level when

placing the MIRPS back into service.

14. RECORDING AND REPORTING OF THE MODIFICATION.

a. Records and reports. SBCCOM will assume responsibility for recording the MWO

application data to the Modification Management Information System (MMIS). Once units receive

their total quantity of assets back from the contractor, immediately notify CW3 Jimmy Taylor at

DSN 256-6012 or commercial at (508) 233-6012.

b. Marking Equipment. Not applicable.

Identification Data. Not applicable.

15. MATERIEL CHANGE (MC) NUMBER. This MWO is authorized by MC Number 1-01-08-

0004.

16. MODIFICATION IDENTIFICATION. Visual identification only. Once modified, the ripcord

grip assembly will protrude from the top of the MIRPS pack tray vs. the right side and the ripcord

grip pocket is removed.