TM 9-4120-411-14
5.19 REVERSING VALVE REPLACEMENT - CONTINUED.
Figure 5-15. Reversing Valve
(4) Connect wire leads from reversing valve (1) using tags and wiring diagram figure 4-14. Remove tags.
(5) Install insulation and secure with insulation tape as necessary.
(6) Install reversing val ve guard (9) and secure with screw (8).
(7) Install two screws (7), flat washers (6), new lock washers (5), and nuts (4).
(8) Carefully slide electrical assembly (3) into frame. Be sure no cables or wires are pinched. Secure with
eight captive screws (2).
(9) Close and secure cover.
5-42