TM 9-4120-411-14
4.18 HANDLE REPLACEMENT - CONTINUED.
Figure 4-17. Handle.
(1) Install handle (4) and align mounting holes. Secure with two flat washers (3), new lock washers (2) and
screws (1).
4.19 LATCH HINGE AND LATCH HINGE DOUBLER REPLACEMENT.
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Materials/Parts
General Mechanics Tool Kit
Lock Washers (qty 2)
NOTE
The latch hinges and latch hinge doublers are different for the left and right side of
the cover. Be sure to note which set is being replaced. The following procedures
apply to any of the four latch hinges and latch hinge doublers. The quantities
given are for each set.
4-54