TM 9-4120-405-13&P
This Task Covers:
a. Replace
b. Repair
Initial Setup:
Tools Required
Tool kit, general mechanics
REMOVAL.
1. Remove two nuts (1), two flat washers (2), and two screws (3).
2. Remove reflector bracket (4).
3. Remove two nuts (5), two flat washers (6), and two screws (7).
4. Remove reflector (8).
5. Remove two nuts (9), two flat washers (10), and two screws (11).
6. Remove refl ector (12).
REPAIR.
Repair is limited to straightening bends and dents. If beyond repair, replace.
INSTALLATION.
1. Position reflector (12).
2. Install two screws (11), two flat washers (10), and two nuts (9).
3. Position reflector (8).
4. Install two screws (7), two flat washers (6), and two nuts (5).
5. Position reflector bracket (4).
6. Install two screws (3), two flat washers (2), and two nuts (1).
4-45