TM 9-4120-404-14
(2) Allow parts to dry.
c. Repair. Repair of metal covers is limited to replacing damaged gaskets and to straightening any bent metal
surfaces.
d. Installation.
(1) Install new gasket material (9) onto front cover (3), rear cover (6), and center cover (8) using adhesive.
Refer to Appendix F for gasket manufacturing instructions.
(2) Install center cover (8) and eight screws (7).
(3) Install rear cover (6), five screws (5), and nine screws (4).
(4) Install front cover (3), five screws (2), and nine screws (1).
Figure 3-16. Metal Covers.
3-63