TM 9-4120-404-14
CHAPTER 1
INTRODUCTION
Section I. GENERAL INFORMATION
1-1. SCOPE.
a. Type of Manual, Operator's, Unit, Direct Support, and General Support Maintenance Manual.
b. Model Number and Equipment Name. AIRTACS Corporation Model MH-40-MP, Horizontal, Compact, Multiple
Power Input (208 VAC, 3 Phase, 50/60/400 Hz), 36,000 Btu/hr Cooling, 31,200 Btu/hr Heating, Air Conditioner.
c. Purpose of Equipment, Cools, heats, and ventilates enclosed spaces.
The unit covered by this manual is
designed for cooling of equipment or personnel within the conditioned area.
1-2. MAINTENANCE FORMS AND PROCEDURES. Department of the Army forms and procedures used for equipment
maintenance will be those prescribed by DA PAM 738-750 (The Army Maintenance Management System (TAMMS) )
(Maintenance Management Update).
1-3. WARRANTY information. Refer to TB 9-4120-404-24.
1-4. REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR'S). If your Air Conditioner needs
improvement, let us know. Send us an EIR. You, the user, are the only one who can tell us what you don't like about
your equipment. Let us know why you don't like the design or performance. Put it on a SF 368 (Product Quality
Deficiency Report). Mail it to us at; Commander, U.S. Army Aviation and Troop Support Command, Attention: AMSAT-I-
MDO, 4300 Goodfellow Blvd., St. Louis, Missouri 63120-1798. We will send you a reply.
1-5. CORROSION PREVENTION AND CONTROL (CPC). Corrosion Prevention and Control of Army materiel is a
continuing concern. It is important that any corrosion problems with this item be reported so that the problem can be
corrected and improvements can be made to prevent the problem in future items.
While corrosion is typically associated with the rusting of metals, it can also include deterioration of other materials such
as rubber and plastic Unusual cracking, softening, swelling, or breaking of the materials may be a corrosion problem.
If a corrosion problem is identified, it can be reported using Standard Form 368, Product Quality Deficiency Report. Use
of key words such as "rust", "deterioration", "corrosion", or "cracking" will insure that the information is identified as a CPC
problem. The form should be submitted to the address specified in the DA PAM 738-750.
1-1