TM 9-4110-256-14
4-18. EVAPORATOR COIL GUARD REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions:
General Safety Instructions:
WARNING
disconnected.
High voltage and exposed rotating parts are
Materials/Parts:
used in the refrigeration unit. Personal injury
can result if power is connected.
Lock Washers (16)
a. Removal. Remove 16 bolts (1), lock washers (2), flat washers (3), and evaporator coil guard (4). Discard lock
washers.
b. Installation. Install evaporator coil guard (4), 16 flat washers (3), new lock washers (2), and bolts (1).
Figure 4-13. Evaporator Coil Guard
NOTE
FOLLOW-ON MAINTENANCE:
Connect power and put unit back into service.
4-33