ARMY TM 9-2805-259-14
AIR FORCE TO 38G2-89-54
NAVY NAVFAC P-8-615-14E
This task covers:
Repair
INITIAL SETUP
Tools
Equipment Condition
Materials/Parts
(1) Remove screw (1) and gasket (2) and remove bowl (3).
(2) Remove pin (4) and remove float (5), spring (6), float valve (7), and gasket (8).
(3) Remove float valve seat (9) and gasket (10).
(4) Remove two screws (11) and washers (12) and remove choke plate (13).
(5) Remove retaining washer (14) and remove choke shaft (15) and two felt seals (16).
(6) Remove nut (17) and washer (18) and remove throttle lever (19).
(7) Remove two screws (20) and remove throttle plate (21).
(8) Gently tap on end of throttle shaft (22) and remove cap plug (23).
(9) Remove throttle shaft (22), seal retainer (24), rubber seal (25), and two bearings (26).
(10) Remove idle speed jet (27) and spring (28).
(11) Remove fuel metering tube (29) and seal washer (30).
WARNING
Drycleaning solvent PD-680 used to clean parts is potentially dangerous to personnel and
property. Avoid repeated and prolonged skin contact. Do not use near open flame or
excessive heat. Flash point of solvent is 100F.-138F. (38C.-60C.).
(12) Clean all items with drycleaning solvent and dry thoroughly.