TM 9-2590-506-13&P
2-8.
FILLING THE TANK (Continued).
CAUTION
Handle pressure cap carefully. Do
not drop pressure cap, it can be
damaged easily. Do not allow safety
chain to become twisted or kinked.
c.
Remove pressure cap as follows:
(1) Press down and rotate pressure cap (1)
counter-clockwise.
(2) Lift pressure cap (1) straight up and off of
pressure adaptor plate (2).
(3) Carefully set pressure cap (1) down along
side converter assembly.
NOTE
Insure 3-lug bayonet type nozzle is in
closed and locked condition and
remove dust cap from nozzle.
d.
Install 3-lug bayonet type nozzle (1) onto
pressure adaptor plate (2) and open nozzle.
2-13