TM 9-2330-386-14&P
5-11 TRUNNION TUBE (CONT).
(5) Install two U-bolts (7) on each trunnion hub (6).
(6) Slide trunnion hubs (6) with U-bolts (7) on trunnion tube (12).
(7) Position trunnion hub (4) on spring assembly (5).
(8) Lower semitrailer frame while guiding U-bolts (7) through trunnion
hub (4).
NOTE
Before tightening nuts (1), be sure bushings (8) are
centered on trunnion hubs.
(9) Install clamp plate (3), four washers (2), and nuts (1). Torque nuts to
880 lb-ft.
(10) Repeat steps (7) through (9) on other side of semitrailer.
( 1 1 ) Remove axle and frame supports.
TASK ENDS HERE
5-19/(5-20blank)