TM 9-2330-386-14&P
4-23 12-VOLT RECEPTACLE (NOSE PLATE) (CONT).
Insert six wire leads (6) in
(5)
receptacle (10) according to marker
bands as shown in illustration. Be
certain wire leads go in proper place.
Tighten six screws (5).
(6)
Slide boot (3) over receptacle (10)
(7)
until seated.
G u i d e wires and tubing into frame
(8)
o p e n i n g and position nose plate (2)
against frame.
Install and tighten four cap-
(9)
screws (1).
( l 0 ) Connect electrical power and test for
proper operation.
TASK END HERE
4-38