TM 9-2330-381-14
18.
Lower lifting device (15) to allow slack in chains (16) and remove chains from steering plate (13).
19.
Remove and restow chains (16) and lifting device (15).
20.
Rotate steering plate (13) to center position and loosely install four remaining capscrews (11) and lockwashers
(12).
21.
Torque all six capscrews (11) to 150 - 160 lb-ft (151 - 217 Nm).
22.
Install two access covers (8 and 9) to platform and secure in place by sliding retainers (10) in outboard direction
and tightening bolts (7).
Change 1 5-67