TM 9-2330-381-14
6.
Position swivel eye assembly (8) and install headed pin (6) and cotter pin (5). Install keeper pin (2) and secure with
linch pin (1). Attach quick-disconnect links (4) to upper block side (3). Secure keeper pin in place by installing two
quick-links (7) and lynch pin (5) with chain to keeper pin (6).
INSTALLATION
1.
Install clamp tab (12), lockwasher (11), and clamp handle (1) onto eyebolt (10). Using a hammer, peen over the
end threads of eyebolt (10) to prevent handle (1) from spinning off eyebolt when loosening clamp tab.
2.
Pass one end of U-bolt (9) through eye of eyebolt (10). Install two nuts (8) onto U-bolt (9).
3.
Pass U-bolt (9) through mounting holes in platform and secure in place by installing two locknuts (7).
WARNING
Snatch block weighs in excess of 150 pounds (68 kg). Always use two persons
when lifting snatch block or injury to personnel may result.
4.
Position snatch block (2) on platform and install bolt (5) through mounting bracket weldment (6) and eye of swivel
and link assembly. Install nut (4) and hitch pin (3).
5.
Restow snatch block (2) on platform and aline clamp tab (12) over snatch block. Secure by tightening clamp handle
(1).
4-337