TM 9-2330-381-14
2.
Unhook latch (4). Remove cotter pin (5), pin (6), and step assembly (7). Discard cotter pin.
3.
Remove two locknuts (8), bolts (9), and step support (10) from gooseneck weldment. Discard locknuts.
4.
Remove two cotter pins (11) and washers (12). Unhook latch (13) and remove upper step section (14). Discard
cotter pins.
5.
Remove three nuts (15), spacers (16), spacers (17), washers (18), screws (19), and lower step section (20).
DISASSEMBLY
1.
Remove six locknuts (21), screws (22), two latches (1), and latch (4) attached to gooseneck weldments. Discard
locknuts.
2.
Remove two locknuts (23), screws (24), and latch (13) from upper step section (14). Discard locknuts.
3.
Remove two locknuts (25), screws (26), and plate (27) from lower step section (20). Discard locknuts.
ASSEMBLY
1.
Position plate (27) on lower step section (20) and secure with two screws (26) and locknuts (25).
2.
Position latch (13) on upper step section (14) and secure with two screws (24) and locknuts (23).
3.
Position two latches (1) on gooseneck weldment bracket and secure each latch with two screws (22) and locknuts
(21).
4.
Position latch (4) on gooseneck step weldment and secure with two screws (22) and locknuts (21).
INSTALLATION
1.
Install lower step section (20) and secure with three screws (19), washers (18), spacers (17), spacers (16), and
nuts (15).
2.
Install upper step section (14) and secure with two washers (12) and cotter pins (11). Hook latch (13) onto plate
(27).
3.
Position step support (10) on gooseneck step, weldment and secure with two bolts (9) and locknuts (8).
4.
Install step (7) and secure with pin (6) and cotter pin (5). Hook latch (4) onto step (7).
5.
Install step (2) by inserting rear lip under pins (3) and rotating step downward. Secure step (2) by hooking two
latches (1).
4-285