TM 9-2330-376-14&P
5-3. TRUNNION AXLE REPLACEMENT.
This Task Covers:
b.
Installation
a.
Removal
Initia/ Setup:
Materials/Parts:
Equipment Conditions:
Four Iockwashers
Personnel Required: Two
Tools/Test Equipment:
General mechanic's tool kit
Floor jack
Puller kit
REMOVAL
a.
1.
Place a floor jack under trunnion axle (4).
NOTE
Perform steps 2 through 9 at each end of trunnion axle.
Remove four jamnuts (2), nuts (1), and screws (9). Remove spacer plate (3).
2.
Lower trunnion axle (4) from under spring assemblies (7).
3.
4.
Remove two socket head screws (16), Iockwashers (15), and Iockrings (14). Discard Iockwashers.
TA701015
5-9