TM 9-2330-376-14&P
4-54. WHEEL CHOCK AND HOLDER MAINTENANCE (Con't).
b . DISASSEMBLY
1.
Remove nut (7) and flatwasher (8). Remove bolt
(6) and chain (9) from wheel chock (3).
2.
Spread snap hook (10) to remove chain (9). Cut
chain if welded.
ASSEMBLY
c.
1.
Spread snap hook (10) and install on chain (9). Close snap hook.
2.
Position chain (9) in groove of wheel chock (3).
Insert bolt (6) through wheel chock (3) and link of chain (9).
3.
4.
Install flatwasher (8) and nut (7) on bolt (6).
1.
Install holder (5) with three bolts (4), new Iockwashers (1), and two nuts (2).
2.
Stow wheel chock (3) in holder (5).
TA700999
4-101