TM9-2330-376-14&P
4 - 2 9 . SERVICE BRAKE MAINTENANCE (Con't).
Install two pins (52) in backing plate (10).
3.
Install two washers (48) on spring and bolt assemblies (49) and install in backing plate (10) with two washers
4.
(47), pinions (46), new Iockwashers (45) and nuts (44).
Position slack adjusting wheel (43) on each support assembly (53) and install adjusting screw (42).
5.
Install two support assemblies (53) on backing plate (10) with four new Iockwashers (51 ) and screws (50).
6.
Install bleeder valve (40) in each wheel cylinder (41).
7.
Install two wheel cylinders (41) and shields (32) on backing plate (10) with four new Iockwashers (33) and
8.
screws (34).
Install two tube assemblies (39) on multiple connector (31).
9.
4-44