TM 9-2330-373-14 & P
Section XI. BODY AND PARTS MAINTENANCE PROCEDURES
4-38. DOORS
THIS TASK COVERS
a.
Removal of door stop and chain
Troubleshooting Reference
b.
Installation of door stop and chain
Item No.
c.
Removal of door
29
Difficulty in locking
d.
Installation of door
or unlocking door
e.
Removal of hinge
f.
Installation of hinge
30
Door hinges do not
g.
Cleaning
operate properly
h.
Inspection and repair
i.
Removal of exterior handle
31
RFI shielding does
J.
Removal of interior handle
not provide a good
k.
Removal of handle door lock assembly
bond
l.
Removal of roller latch lock assembly
m.
Removal of bolt slide fasteners and locking rods
n.
Inspection and repair
o.
Installation of bolt slide fasteners and locking rods
p.
Installation of roller latch lock assembly
q.
Installation of handle door lock assembly
r.
Installation of interior handle
s.
Installation of exterior handle
t.
Removal of door seals
u.
Installation of door seals
Test Equipment Required: None
REMOVAL OF DOOR STOP AND CHAIN
1.
Remove four screws (2) and lock washers (3)
securing door stop and chain (1).
2.
Remove door stop and chain.
INSTALLATION OF DOOR STOP AND CHAIN
1.
Position door stop and chain (1) on door and on
door frame.
2.
Secure in position with four screws (2) and lock
washers (3).
1.
Door stop
2.
Screw
3.
Washer
TA 314836
4-116