TM 9-2330-373-14 & P
4-21.
HYDRAULIC WHEEL CYLINDER (cont)
REMOVAL (cont)
CAUTION
Prevent brake fluid from coming in contact with brake linings. Contaminated linings must be replaced.
9.
Remove wheel cylinder (1) or (2). Remove spark shield (3) or (4) from cylinder.
INSTALLATION
1.
Position spark shield (3) or (4) over rear of each
wheel cylinder (1) or (2).
2.
Place wheel cylinder between ends of brake
shoe and through brake backing plate (5).
Install two lock washers (6) and bolts (7)
from rear of backing plate (5) to secure cylinder
and spark shield to backing plate.
1. Cylinder
2. Cylinder
3. Shield
4. Shield
5. Backing plate
6. Washer
7. Bolt
TA 314779
4-58