TM 9-2330-373-14 & P
1-7. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS (cont)
(1) WHEEL AND TIRE I
The eight wheels (2) are offset disk type rims with split-
type retaining rings.
Nuts (1) for right wheels (marked R) have right hand
threads.
Nuts (1) for left wheels (marked L) have left hand
threads. The studs are similarly marked.
Nuts (1) must be turned in opposite direction of forward
rotation of wheel to be loosened or removed.
Tires (3) are pneumatic type, non-directional, cross-
country tread, size 9.00 by 20, 8 ply rating.
1. Cap nut
2. Wheel
3. Tire
(2) AXLE ASSEMBLY
Two axle assemblies, one located at center and one at rear of dolly assembly.
Each axle assembly has brake drums, hubs, brake assemblies, and associated parts.
(3) HUB (1)
Each hub is mounted on axle spindle on two tapered
Brake drums are mounted on hubs.
(4) BRAKE DRUM (2)
Each brake drum is secured to hub through a dished
back front brake drive (3)
A hub cap and gasket, secured to hub, keeps out
1. Hub
moisture and dirt.
2. Brake drum
3. Back front brake drive
TA 314694
1-11