TM 9-2330-231-14&P
HANDBRAKE CABLE ASSEMBLY- CONTINUED
ACTION
LOCATION
ITEM
REMARKS
INSTALLATION -CONTINUED
15.
Handbrake
Clevis (2)
a.
Pull on clevis (2) toward handbrake
cable (1)
lever (3) to remove slack in hand-
brake cable (1).
b. Turn clevis (2) clockwise or counter-
clockwise until holes (4 and 5) just
line up.
16.
Nut (6)
Using 1/2-inch wrench, tighten against
clevis (2).
17.
Clevis (2) to
Clevis pin (7)
and Using pliers, install.
handbrake
new cotter pin (8)
lever (1)
NOTE
TASK ENDS HERE
TA223884
4-50