TM 9-2330-211-14&P
LEFT LANDING GEAR LEG (Con't)
4-38.
ACTlON
LOCATION
ITEM
REMARKS
Using hammer and brass drift, drive in.
Two bushings
49.
Gearbox (18)
(39)
Slide in part way from back of gearbox (18).
Bevel gear-
50.
shaft (31)
Put in.
Key (35)
Bevel gear-
51.
shaft (31)
Slide on.
Bevel gear (32)
52.
and washer (33)
Put in.
Bevel gear-
Bushing (39)
53.
shaft (31)
a. Line up holes.
Two pins (36)
54.
Bevel gear (32)
in. punch, drive in.
b. Using hammer and
and bevel gear-
shaft (31)
Gasket (29) and
Gearbox (18)
55.
b. Place gasket (29) and cover (30) in position.
cover (30)
Screw in and tighten using screwdriver.
Two Iockwashers
Cover (30)
56.
(27) and screws (26)
Screw in and tighten using
in. wrench and
in.
Three lubrication
57.
Gearbox (18),
wrench.
fittings (28, 40, and 45)
cover (30), and
upper leg (6)
Put in and line up holes.
Nut (43)
Lower leg tube (7)
58.
Put in.
Two pins (44)
59.
4-122