TM 9-2330-211-14&P
4-30. AIRBRAKE CHAMBER
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Tools/Test Equipment:
Extension, socket wrench, in. drive
Hammer, ball-peen
Materials/Parts:
Pliers, slip-joint
Cotter pin
Punch, drive-pin
in., in. drive
Wrench, open-end, in.
Wrench, open-end, 1 in.
Wrench, pipe
ACTlON
LOCATION
ITEM
REMARKS
REMOVAL
WARNING
Always release air from system before working on airbrake
chambers. Failure to do so could result in personal injury.
1 . Adapter (9)
Outer union nut (10)
Using in. wrench and
wrench, hold adapter
(9), unscrew outer union nut (10), and remove.
2. Airbrake chamber (11)
Elbow (8) and
Using pipe wrench, unscrew and remove as an
adapter (9)
assembly.
3 . Pushrod (12)
Nut (3)
Using 1 in. wrench, unscrew part way.
4-83