TM 9-2330-211-14&P
PREPARATION FOR USE (Con't)
2-5.
LOADING RAMPS AND WHEEL COVER PLATES STORAGE AFTER USE
Pick up and carry four wheel cover plates (37) from wheel openings (36) to the forward part of load bed. Position
1.
on load bed as shown.
2. Pickup and carry two loading ramps (34) and place on top of wheel cover plates (37). Position loading ramps
so that wheel cover plates are directly underneath.
WARNING
The loading ramps should always be lashed on top of the load bed when traveling.
Falling ramps could result in damage to equipment or injury to personnel.
3.
Use lashing chains (41) and Ioadbinders (40) to secure loading ramps (34) and wheel cover plates (37) in
place.
2-17