TM 9-2330-211-14&P
S e c t i o n III. OPERATION UNDER USUAL CONDITIONS
Page
Page
After Use . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparation for Use . . . . . . . . . . . . . . . . . .
Operation . . . . . . . . . . . . . . . . .
2-5.
PREPARATION FOR USE
Perform all Before (B) Operator/Crew Preventive Maintenance Checks and Services in Table 2-1 before doing the
procedures below.
POSITIONING CHOCK BLOCKS
1.
Take chock blocks (1) out of stowage brackets (2).
2.
Place one chock block (1) in front the outer forward wheel and tire assembly (3) and one behind the outer rear
wheel and tire assembly (4).
3. Repeat steps 1 and 2 for other side of semitrailer.