TM 9-2330-203-14&P
4-47.
LANDING LEG BRACE REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
Two cotter pins
General mechanic's tool kit
Two jackstands
a.
REMOVAL
1.
Support front of dolly frame with jackstands.
2.
Remove safety clip (1) from pin (4). Release pin
securing brace (6) to landing leg or bracket on
front of frame. Allow brace to rest on ground.
3.
Remove two cotter pins (2) and washers (3)
securing brace (6) to bolts welded to frame.
Remove brace. Discard cotter pins.
4.
If damaged, remove chain and pin assembly (5)
and safety clip from brace (6).
e.
INSTALLATION
1.
If removed, install chain and pin assembly (5) and
safety clip on brace (6).
2.
Install brace (6) on bolts welded to frame using
two washers (3) and new cotter pins (2).
3.
Secure brace (6) to landing leg or bracket on front
of frame with pin (4).
4.
Remove jackstands from dolly frame.
5.
Install safety clip (1)' into pin (4).
4-108