TM 9-2320-360-10
3-6. CHANGING TIRE ASSEMBLY (CONT)
d. Spare Installation
WARNING
Always wear heavy duty gloves when handling winch cable. Never
let cable run through hands. Frayed cable can cut hands severely.
(1) Remove cable (1) from spare tire assembly (2) with aid of assistant.
(2) Roll spare to assembly (2) up to axle 3) from which flat tire assembly (4) was removed with
aid assistant.
CAUTION
Position spare tire assembly so that two larger holes in spare tire
assembly are aligned with CTIS fittings.
Damage to CTIS fittings and wheel may result if spare tire assembly
is not correctly installed.
NOTE
Spare tire assembly should have CTIS valve facing out.
(3) Line up two holes (5) in spare tire assembly (2) with CTS fittings (6) in hub (7) with aid of
assistant.
(4) Line up 10 holes (8) in spare tire assembly (2) with studs (9) on hub (7) with aid of
assistant.
WARNING
Tire assembly weighs 523 lbs (237 kg). Do not try to lift or catch tire
assembly. Injury or death to personnel may result.
(5) Lean top of spare tire assembly (2) against hub (7) and axle (3) with aid of assistant.
3-54 Change 1