TM 9-2320-360-10
NOTE
If air powered wrench is used, HET Tractor air system will be
depleted. Engine must be running to provide air to components. If
air powered wrench is used, do steps (5) thru (7). If not, go to step
(8).
If engine is started during tire change, CTIS on/off switch must be in
the off position.
(5) Remove air wrench (7) and air hose (8) from stowage box (9).
(6) Install air hose (8) in are supply coupling (10).
(7) Install air hose (8) on air wrench (7).
WARNING
Cable must be secure and taut around wheel before removing
screws. Failure to comply may result in tire falling, causing injury
to personnel.
(8) Remove three screws (11) from wheel (4) and bracket (12).
Change 1 3-49