|
| |
Back
GENERATOR CONSTRUCTION | Up
Neets Module 05-Introduction to Generators and Motors | Next
VOLTAGE CONTROL |
1-20
Figure 1-20.—Construction of a dc generator (cutaway drawing).
VOLTAGE REGULATION
The regulation of a generator refers to the VOLTAGE CHANGE that takes place when the load
changes. It is usually expressed as the change in voltage from a no-load condition to a full-load condition,
and is expressed as a percentage of full-load. It is expressed in the following formula:
where EnL is the no-load terminal voltage and EfL is the full-load terminal voltage of the generator.
For example, to calculate the percent of regulation of a generator with a no-load voltage of 462 volts and
a full-load voltage of 440 volts
Given:
· No-load voltage 462 V
· Full-load voltage 440 V
Solution:
|
