TM 11-7025-221-10
3-4. Activate Loopback Option Procedure - Continued.
Demux Loopback Procedures - Continued
Step
Operation Action/Message Displayed
Press CLR key to clear display.
9
3-5. Terminate Loopback Option Procedures.
Perform the following procedures to remove the Ioopback option and place the TD-1337(V)/G back in the
primary mode of operation.
Terminate Loopback Option
Procedures
Step
Notify local users and remote TD-1337(V)/G's in network:
1
q Traffic flow is going to be interrupted while mode change routine is performed.
q ocal user's associated with demux('s) that were in Ioopback will now receive normal traffic
flow from TD-1337(V)/G. (Supergroup inputs from modems will now be processed.)
Perform system mode change (para 2-11) and change from alternate memory to primary memory
2
mode of operation.
NOTE
TD-1337(V)/G is now operating in system configuration that was being used
before Ioopback option was performed.
If alternate memory contained valid configuration data before Ioopback option was used, perform
3
the appropriate local mux and Rmux configuration routines to enter data back in alternate memory.
3-8