 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
  21. Pinion Housing
a.
Refer to figure 9 for instructions
covering the preparation necessary for
removal of the pinion housing.
b.
Check the brush spring tension as
shown in figure 10. If the tension of any
brush spring is not between 20 to 55
ounces, mark the spring for replacement.
c.
Refer to figure ll for instructions
covering removal of the brushes.
d.
Refer to figure 12 for instructions
covering removal of the pinion housing.
A - Remove frame packing ("O" ring).
B - Remove frame plug.
c - Scribe alinement marks on starter to
facilitate assembly,
Preparing for removal or
installation of pinion housing.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals