National Item Identification Number
01-071-0678
010710678
5970-01-071-0678
5970010710678
National Stock Number
Item Name
INSULATOR,WASHER
Federal Supply Class
5970
Referenced on: http://www.tpub.com/content/antennaandmasts/TM-11-5895-1038-24P/TM-11-5895-1038-24P0037.htm
Referenced on: http://www.tpub.com/content/antennaandmasts/TM-11-5895-1038-24P/TM-11-5895-1038-24P0109.htmDescription
An insulator that is essentially thin and flat, with one through hole centrally located. The general shape may vary by the addition of features such as beveled edges, indented surfaces, through hole keys, and/or peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. The thickness measured between the two parallel bearing surfaces must not exceed 25 percent of the outside diameter or the shortest distance between peripheral flats. Excludes items with more than one hole. See also INSULATOR, DISK; INSULATOR, BEAD; INSULATOR, BUSHING; and INSULATOR, PLATE
Commercial and Government Entity Code (Supplier Data)
80063
12110
EATON CORP
INFORMATION MANAGEMENT SYSTEMS DIV
696 HAMPSHIRE RD
THOUSAND OAKS
CA
91359
805-496-2405
86928
SEASTROM MANUFACTURING CO.
456 SEASTROM ST
TWIN FALLS
ID
83301
208-737-4300
Reference Numbers (Part Numbers)
SM-B-890420
40920
5620-39-94
Required Categories
STYLE DESIGNATOR
INSIDE DIAMETER
OUTSIDE DIAMETER
OVERALL HEIGHT
MATERIAL AN
Required Description
Q1 ROUND, FLAT
0.169 INCHES MINIMUM AND
0.179 INCHES MAXIMUM
0.365 INCHES MIN