National Item Identification Number
01-497-7327
014977327
5365-01-497-7327
5365014977327
National Stock Number
Item Name
SHIM
Federal Supply Class
5365
Description
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
Commercial and Government Entity Code (Supplier Data)
0HM32
ENGINE POWER SOURCE INC
220 OLYMPIC ST
CHARLOTTE
NC
28273
704-944-1880
0XN96
MINUTEMAN POWERBOSS INC
DIV MINUTEMAN POWERBOSS
175 ANDERSON ST
ABERDEEN
NC
28315
630-627-6900
Reference Numbers (Part Numbers)
16414-52090
3331778
Required Categories
III END ITEM IDENTIFICATION
III PART NAME ASSIGNED BY CONTROLLING AGENCY
Required Description
QRE-3000, HIGH PRESSURE WASHER
SHIM, INJECTION 0.15MM