National Item Identification Number
01-471-8216
014718216
5365-01-471-8216
5365014718216
National Stock Number
Item Name
SPACER,RING
Federal Supply Class
5365
Referenced on: http://www.tpub.com/content/trucks2.5tonv1-2/TM-9-2320-365-24P/css/TM-9-2320-365-24P_1030.htm
Referenced on: http://www.tpub.com/content/trucks2.5tonv1-2/TM-9-2320-365-24P/css/TM-9-2320-365-24P_1130.htm
Referenced on: http://www.tpub.com/content/trucks2.5tonv1-2/TM-9-2320-365-24P/css/TM-9-2320-365-24P_939.htmDescription
A circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. It has a solid cross-section and two flat parallel bearing surfaces. The distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. The diameter of the centrally located hole must exceed 75 percent of the outside diameter. Excludes laminated items. For items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see GASKET. For items manufactured from lubricated plastics, see BEARING, WASHER, THRUST. For items manufactured from lubricated felt, see FELT, MECHANICAL, PREFORMED. Excludes DISK, VALVE; INSULATOR WASHER; and SHIM. See also SPACER, PLATE and SPACER, SLEEVE.
Commercial and Government Entity Code (Supplier Data)
19207
0FW39
STEWART & STEVENSON TACTICAL VEHICLE
SYSTEMS LP
5000 INTERSTATE 10 HWY
SEALY
TX
77474
713-867-1850
Reference Numbers (Part Numbers)
12421651
12421651-001
Required Categories
MATERIAL
OVERALL THICKNESS
INSIDE DIAMETER
OUTSIDE DIAMETER
III END ITEM IDE
Required Description
PLASTIC POLYETHYLENE
0.220 INCHES MINIMUM AND
0.280 INCHES MAXIMUM
0.630 INCH