National Item Identification Number
01-343-2780
013432780
5365-01-343-2780
5365013432780
National Stock Number
Item Name
SHIM
Federal Supply Class
5365
Referenced on: http://www.tpub.com/content/ahapache/TM-1-1520-238-23-9/css/TM-1-1520-238-23-9_333.htm
Referenced on: http://www.tpub.com/content/ahapache/TM-1-1520-238-23-9/css/TM-1-1520-238-23-9_336.htmDescription
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
Commercial and Government Entity Code (Supplier Data)
Reference Numbers (Part Numbers)
MIL-S-22499CMPSN3TY1CL2
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
CONSTRUCTION
LAMINATION QUANTIT
Required Description
STEEL COMP 302
QQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OR
MIL-S-5059