National Item Identification Number
01-276-4902
012764902
5365-01-276-4902
5365012764902
National Stock Number
Item Name
SPACER,PLATE
Federal Supply Class
5365
Description
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
Commercial and Government Entity Code (Supplier Data)
05083
BACHARACH INC
621 HUNT VALLEY CIR
NEW KENSINGTON
PA
15068
724-334-5064
Reference Numbers (Part Numbers)
67-6415
Required Categories
MATERIAL
SURFACE TREATMENT
BOLT HOLE QUANTITY
STYLE DESIGNATOR
HOLE DIAMETER
Required Description
STEEL CORROSION RESISTING
ZINC
3
A21 CIRCULAR
0.344 INCHES NOMINAL
3.313 IN