National Item Identification Number
01-245-2612
012452612
5365-01-245-2612
5365012452612
National Stock Number
Item Name
SPACER,PLATE
Federal Supply Class
5365
Description
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
Commercial and Government Entity Code (Supplier Data)
K3996
B/E AEROSPACE UK LTD
GROVEBURY ROAD
LEIGHTON BUZZARD
LU7 4TB
UNITED KINGDOM
01525 858300
63367
BE AEROSPACE INC
DBA B E AEROSPACE INC. DIV LENEXA
10800 PFLUMM
LENEXA
KS
66215
913-338-9836
Reference Numbers (Part Numbers)
2075-0307-01
2075-0307-01
Required Categories
MATERIAL
SLOT WIDTH
SLOT LENGTH
OVERALL LENGTH
OVERALL WIDTH
CENTER TO CENT
Required Description
STEEL
0.150 INCHES NOMINAL
0.250 INCHES NOMINAL
3.020 INCHES NOMINAL
2.310 I