National Item Identification Number
01-137-8618
011378618
5365-01-137-8618
5365011378618
National Stock Number
Item Name
SPACER,PLATE
Federal Supply Class
5365
Description
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
Commercial and Government Entity Code (Supplier Data)
93232
88032
CURTISS-WRIGHT ELECTRO-MECHANICAL
CORP
222 CAMERON DR
SUITE 200
PHILLIPSBURG
NJ
08865
908-387-6158
93232
93232
93232
93232
Reference Numbers (Part Numbers)
RY-108328
RY-167693 ITEM 26
RY-167693 ITEM 26
RY-185759 ITEM 44
15150P
3205
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
BOLT HOLE QUANTITY
STYLE DESIGN
Required Description
STEEL
ASTM A515 ASSN STD SINGLE MATERIAL RESPONSE
14
A21 CIRCULAR
0.281 INCH