National Item Identification Number
01-017-1454
010171454
5365-01-017-1454
5365010171454
National Stock Number
Item Name
SPACER,PLATE
Federal Supply Class
5365
Description
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
Commercial and Government Entity Code (Supplier Data)
95270
SKURKA AEROSPACE INC.
4600 CALLE BOLERO
CAMARILLO
CA
93012
805-484-8884
05869
Reference Numbers (Part Numbers)
A8050-20SS
5049-234
Required Categories
MATERIAL
STYLE DESIGNATOR
OUTSIDE DIAMETER
APERTURE DIAMETER
SPEC/STD CONTRO
Required Description
STEEL CORROSION RESISTING
A1 CIRCULAR
0.875 INCHES NOMINAL
0.406 INCHES NOMIN