National Item Identification Number
00-788-6126
007886126
5365-00-788-6126
5365007886126
National Stock Number
Item Name
SPACER,PLATE
Federal Supply Class
5365
Description
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
Commercial and Government Entity Code (Supplier Data)
16662
LIFT PARTS MFG CO INC
DIV OF ECHLIN MFG CO THE
99 S BARRON BLVD
GRAYSLAKE
IL
60030
847-223-8989
83299
NACCO MATERIALS HANDLING GROUP INC.
DBA YALE MATERIALS HANDLING
1400 SULLIVAN DRIVE CALLER NO. 12011
GREENVILLE
NC
27834
908-788-3585
Reference Numbers (Part Numbers)
AB0050119161
05-1191061
1191061
Required Categories
MATERIAL
BOLT HOLE QUANTITY
STYLE DESIGNATOR
HOLE DIAMETER
OVERALL LENGTH
O
Required Description
PLASTIC
2
A16A NON-CIRCULAR W/SQUARE CORNERS
0.375 INCHES NOMINAL
4.000 INCH