National Item Identification Number
00-734-2614
007342614
5365-00-734-2614
5365007342614
National Stock Number
Item Name
SHIM
Federal Supply Class
5365
Description
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
Commercial and Government Entity Code (Supplier Data)
24617
52788
GENERAL MOTORS CORP
SAGINAW DIV
3900 HOLLAND RD
SAGINAW
MI
48605
810-606-2000
52793
27618
19207
Reference Numbers (Part Numbers)
268797
268797
268797
3967P11
7342614
Required Categories
MATERIAL
CONSTRUCTION
BOLT HOLE QUANTITY
HOLE DIAMETER
OVERALL LENGTH
OVERA
Required Description
STEEL
ONE-PIECE
4
0.938 INCHES NOMINAL
4.500 INCHES NOMINAL
3.500 INCHES NO