National Item Identification Number
14-205-7787
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
F0110
AFNOR ASSOCIATION FRANCAISE DE NORMA
ISATION
11 AV FRANCIS DE PRESSENSE
LA PLAINE ST DENIS
93500
FRANCE
01 41 62 80 00
F0111
F0110
AFNOR ASSOCIATION FRANCAISE DE NORMA
ISATION
11 AV FRANCIS DE PRESSENSE
LA PLAINE ST DENIS
93500
FRANCE
01 41 62 80 00
F0302
HISPANO SUIZA GROUPE SNECMA
18 BD LOUIS SEGUIN
COLOMBES
92700
FRANCE
01 41 30 50 10
Reference Numbers (Part Numbers)
E27611E30CAU
JEACA030U
JECA030U
440003
57080-400-1
Required Categories
Required Description