National Item Identification Number
12-345-4101
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://generators.tpub.com//TM-9-6115-669-13P/css/TM-9-6115-669-13P_422.htm
Referenced on: http://generators.tpub.com//TM-9-6115-669-13P/css/TM-9-6115-669-13P_533.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
C0882
ETTINGER GMBH
OTTOSTRASSE 5
HOFOLDING
85649
GERMANY
08104-6623-0
C0882
ETTINGER GMBH
OTTOSTRASSE 5
HOFOLDING
85649
GERMANY
08104-6623-0
D0857
LECHMOTOREN GMBH
ELEKTROMASCHINENBAU
SUEDLICHE ROEMERSTRASSE 12-16
ALTENSTADT
86972
GERMANY
08861-710-0
Image (It is your responsibility to verify the accuracy of these images)
Part Numbers (Reference Numbers)
03.03.059
3.03.059
395.25.0032
Required Categories
Required Description