National Item Identification Number
00-205-9078
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://constructionmisc.tpub.com//TM-9-4940-568-24P/css/TM-9-4940-568-24P_150.htm
Referenced on: http://constructionmisc.tpub.com//TM-9-4940-568-24P/css/TM-9-4940-568-24P_444.htm
Referenced on: http://constructionmisc.tpub.com//TM-9-4940-568-24P/css/TM-9-4940-568-24P_509.htm
Referenced on: http://www.tpub.com/content/hummer/TM-9-2815-237-34P/css/TM-9-2815-237-34P_126.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2320-387-24P/TM-9-2320-387-24P1105.htm
Referenced on: http://www.tpub.com/content/misc_manuals_2/TM-9-2320-387-24P/TM-9-2320-387-24P1241.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
33287
SPX CORPORATION
DIV SPX / KENT-MOORE TOOL DIV
655 EISENHOWER DRIVE
OWATONNA
MN
55060
586-578-7445
24446
75638
NGK-LOCKE INC
2525 INSULATOR DR
BALTIMORE
MD
21230
410-347-1726
NSN (National Stock Number) 5310-00-205-9078, 5310002059078 NIIN (National Identification Number) 00-205-9078, 002059078
Part Numbers (Reference Numbers)
RS13500-300
6805
6805
Required Categories
MATERIAL
SURFACE TREATMENT
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAM
Required Description
STEEL OVERALL
ZINC OVERALL
0.625 INCHES NOMINAL
1 ROUND
1.750 INCHES NOMINAL