National Item Identification Number
01-439-4256
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://constructiontractors.tpub.com//TM-9-2320-302-24P/TM-9-2320-302-24P1069.htm
Referenced on: http://constructiontractors.tpub.com//TM-9-2320-302-24P/TM-9-2320-302-24P1141.htm
Referenced on: http://constructiontractors.tpub.com//TM-9-2320-303-24P/TM-9-2320-303-24P0626.htm
Referenced on: http://constructiontractors.tpub.com//TM-9-2320-303-24P/TM-9-2320-303-24P0666.htm
Referenced on: http://trucks5ton.tpub.com//TM-9-2320-366-24P-2/TM-9-2320-366-24P-20368.htm
Referenced on: http://trucks5ton.tpub.com//TM-9-2320-366-24P-2/TM-9-2320-366-24P-20668.htm
Referenced on: http://trucks5ton.tpub.com//TM-9-2320-366-24P-2/TM-9-2320-366-24P-20808.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
74410
HOLLAND USA INC
1950 INDUSTRIAL BLVD
MUSKEGON
MI
49442
888-396-6501
NSN (National Stock Number) 5310-01-439-4256, 5310014394256 NIIN (National Identification Number) 01-439-4256, 014394256
Part Numbers (Reference Numbers)
XB-07431
Required Categories
Required Description