National Item Identification Number
00-178-9610
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-243-34P/css/TM-10-3930-243-34P_435.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-243-34P/css/TM-10-3930-243-34P_502.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-243-34P/css/TM-10-3930-243-34P_549.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
1LW55
REMY INTERNATIONAL INC
2902 ENTERPRISE DR
ANDERSON
IN
46013
765-778-6889
23862
MILITARY VEHICLES OPN
GENERAL MOTORS TRUCK AND BUS GROUP
660 S BOULEVARD E
PONTIAC
MI
48341
248-456-5000
24617
77237
NSN (National Stock Number) 5310-00-178-9610, 5310001789610 NIIN (National Identification Number) 00-178-9610, 001789610
Part Numbers (Reference Numbers)
KC7943
1914289
1914289
1914289
1914289
874416
874416
Required Categories
MATERIAL
SURFACE TREATMENT
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAM
Required Description
STEEL OVERALL
ZINC AND
DICHROMATE OVERALL
0.223 INCHES MINIMUM AND
0.228 INC