National Item Identification Number
00-167-0844
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
D9182
6R888
JTD STAMPING CO INC
403 WYANDANCH AVE
W BABYLON
NY
11704
631-643-4144
D9182
32345
DEFENSE REDUCTION AGENCY
MS 6201
8725 JOHN J KINGMAN RD
FORT BELVOIR
VA
22060
703-767-0832
NSN (National Stock Number) 5310-00-167-0844, 5310001670844 NIIN (National Identification Number) 00-167-0844, 001670844
Part Numbers (Reference Numbers)
AN960-C1616L
AN960-1616L
AN960-1616L
A17652-2
NAS1149F1632P
701-4711389 PIE
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
SURFACE TREAT
Required Description
STEEL OVERALL
MIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OR
QQ-S-698 FED SPE