National Item Identification Number
01-249-0479
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://constructiontractors.tpub.com//TM-5-2420-224-24P-1/css/TM-5-2420-224-24P-1_783.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2420-224-24P-1/css/TM-5-2420-224-24P-1_826.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
D8286
DIN DEUTSCHES INSTITUT FUER NORMUNG
EV
BURGGRAFENSTR. 6
BERLIN
10787
GERMANY
030-2601-0
D8046
DAIMLERCHRYSLER AG
ABT GSP/TIC HPC R823
STUTTGART
GERMANY
0711-17-83114
64678
15526
METRIC AND MULTISTANDARD
COMPONENTS CORP
120 OLD SAW MILL RIVER RD
HAWTHORNE
NY
10532
914-769-5020
Reference Numbers (Part Numbers)
B34 DIN 125-ST
000125036003
000125036003
125 34 S
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
STEEL OVERALL
34.0 MILLIMETERS NOMINAL
1 ROUND
60.0 MILLIMETERS NOMINAL
1 RO